UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20680
                        
                            Issued:1991-02-28
                    
                            Revised:2012-04-20
                    
                            Style
                            20680
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 300 Vac, FT2 flame.
		
			Conductor22 AWG consisting of seven 30 AWG stranding and 20 AWG consisting of ten 30 AWG stranding.
		
			InsulationExtruded SRPVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point.
		
			AssemblyForty (twenty pairs) of 22 AWG and eighteen (nine pairs) of 20 AWG cabled together with an overall polyester binder.
		
			ShieldRequired - a copper wire braid.
		
			JacketExtruded TPE, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring of robotic equipment where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20680	Issued:1991-02-28
			Revised:2012-04-20


Rating	80 deg C, 300 Vac, FT2 flame.

Conductor	22 AWG consisting of seven 30 AWG stranding and 20 AWG consisting of ten 30 AWG stranding.

Insulation	Extruded SRPVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point.

Assembly	Forty (twenty pairs) of 22 AWG and eighteen (nine pairs) of 20 AWG cabled together with an overall polyester binder.

Shield	Required - a copper wire braid.

Jacket	Extruded TPE, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring of robotic equipment where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.