UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20681
                        
                            Issued:1991-02-28
                    
                            Revised:2012-03-26
                    
                            Style
                            20681
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating80 deg C, 300 Vac, FT2 flame.
		
			Conductor22 AWG (ten strands of 30 AWG), 20 AWG (seven strands of 30 AWG), tinned or bare copper.
		
			InsulationExtruded SRPVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point.
		
			AssemblyFourteen (seven pairs) 22 AWG and six (three pairs) 20 AWG cabled together with an overall polyester binder, a copper braid, and overall polyester separator.
		
			JacketExtruded TPE, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of robotic equipment where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20681	Issued:1991-02-28
			Revised:2012-03-26


Rating	80 deg C, 300 Vac, FT2 flame.

Conductor	22 AWG (ten strands of 30 AWG), 20 AWG (seven strands of 30 AWG), tinned or bare copper.

Insulation	Extruded SRPVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point.

Assembly	Fourteen (seven pairs) 22 AWG and six (three pairs) 20 AWG cabled together with an overall polyester binder, a copper braid, and overall polyester separator.

Jacket	Extruded TPE, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of robotic equipment where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.