UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20689
                        
                            Issued:1991-04-24
                    
                            Revised:2019-11-07
                    
                            Style
                            20689
                        
                            Multiple conductor cable using non integral Jacket.
                    
			Rating90 deg C, 150 Vac, Cable flame.
		
			Conductor36 AWG minimum. solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors Assemblyor groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic tape wrap. The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors or over the shield, if provided.
		
			ShieldOptional.
		
			JacketPUR
		
			major dia in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 in45 avg36 min
		
			1.001-1.500 in60 avg48 min
		
			1.501-2.500 in80 avg64 min
		
			2.501-4.000 in110 avg88 min
		
			4.001 in and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20689	Issued:1991-04-24
			Revised:2019-11-07


Rating	90 deg C, 150 Vac, Cable flame.

Conductor	36 AWG minimum. solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors Assemblyor groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic tape wrap. The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors or over the shield, if provided.

Shield	Optional.

Jacket	PUR
	major dia in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 in	45 avg	36 min
	1.001-1.500 in	60 avg	48 min
	1.501-2.500 in	80 avg	64 min
	2.501-4.000 in	110 avg	88 min
	4.001 in and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring.