UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20691
                        
                            Issued:1991-05-09
                    
                            Revised:2012-03-21
                    
                            Style
                            20691
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor30 AWG - 20 AWG.
		
			InsulationCenter conductor - extruded PVC, 13 mils minimum thickness at any point. Minimum average thickness not specified. Other conductor - not Insulated.
		
			AssemblyThe uninsulated conductor is laid parallel with the insulated conductor and jacket is extruded over the assembly.
		
			JacketExtruded PVC, 10 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring in Class 2 Circuits of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20691	Issued:1991-05-09
			Revised:2012-03-21


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	30 AWG - 20 AWG.

Insulation	Center conductor - extruded PVC, 13 mils minimum thickness at any point. Minimum average thickness not specified. Other conductor - not Insulated.

Assembly	The uninsulated conductor is laid parallel with the insulated conductor and jacket is extruded over the assembly.

Jacket	Extruded PVC, 10 mils minimum average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring in Class 2 Circuits of Electronic Equipment.