UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20694
                        
                            Issued:1991-06-14
                    
                            Revised:2012-04-26
                    
                            Style
                            20694
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, Voltage not specified, Cable flame.
		
			Conductor40 AWG minimum. solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of single, twisted conductors twisted together.  The conductors or groups of conductors are laid parallel forming a flat, oval or round cable.  The lay of the conductors is not specified.  A barrier layer and/or fillers are optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. Extruded TPU, 6 mils minimum thickness at any point.  May be over the conductor assembly.
		
			JacketExtruded TPU
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			3.200 inches or less30 mils24 mils
		
			3.201-4.000 inches45 mils36 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20694	Issued:1991-06-14
			Revised:2012-04-26


Rating	80 deg C, Voltage not specified, Cable flame.

Conductor	40 AWG minimum. solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of single, twisted conductors twisted together. The conductors or groups of conductors are laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. Extruded TPU, 6 mils minimum thickness at any point. May be over the conductor assembly.

Jacket	Extruded TPU
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	3.200 inches or less	30 mils	24 mils
	3.201-4.000 inches	45 mils	36 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.