UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20695
                        
                            Issued:1991-06-13
                    
                            Revised:2012-03-22
                    
                            Style
                            20695
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, Voltage rating not specified, Cable flame.
		
			Insulated ConductorNo. 40 AWG min. Labeled or complying with manufacturer's AWM Procedure having a min rating of 60 deg C.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of single, twisted conductors twisted together. The conductors or groups of conductors are laid parallel forming a flat cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketPVC, dia. or 4.0 inches or less, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20695	Issued:1991-06-13
			Revised:2012-03-22


Rating	60 deg C, Voltage rating not specified, Cable flame.

Insulated Conductor	No. 40 AWG min. Labeled or complying with manufacturer's AWM Procedure having a min rating of 60 deg C.

Assembly	Consists of two or more conductors, twisted pairs or groups of single, twisted conductors twisted together. The conductors or groups of conductors are laid parallel forming a flat cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	PVC, dia. or 4.0 inches or less, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.