UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20696
                        
                            Issued:1971-06-13
                    
                            Revised:2012-04-26
                    
                            Style
                            20696
                        
                            Flat Cable.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG - 14 AWG Flat, copper foil. Conductors 0.5 - 10.0 mils thick, 3-300 mils wide.
		
			Insulation0.4 mil minimum biaxially oriented PETP (polyester) film bonded each side with 0.5 mil polyester adhesive.
		
			AssemblyTwo to 150 conductors laid parallel, or may fan out in one plane.
		
			ShieldOptional. Metal faced polyester tape.
		
			Misc.Drain wire - optional.
		
			CoveringOptional. Polyester film, 0.02 - 4.0 mils bonded to cable with polyester adhesive.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20696	Issued:1971-06-13
			Revised:2012-04-26


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG - 14 AWG Flat, copper foil. Conductors 0.5 - 10.0 mils thick, 3-300 mils wide.

Insulation	0.4 mil minimum biaxially oriented PETP (polyester) film bonded each side with 0.5 mil polyester adhesive.

Assembly	Two to 150 conductors laid parallel, or may fan out in one plane.

Shield	Optional. Metal faced polyester tape.

Misc.	Drain wire - optional.

Covering	Optional. Polyester film, 0.02 - 4.0 mils bonded to cable with polyester adhesive.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.