UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20704
                        
                            Issued:1991-08-05
                    
                            Revised:2012-04-02
                    
                            Style
                            20704
                        
                            Multiple-conductor cable using non-integral covering
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor34 AWG - 24 AWG, solid or stranded.
		
			InsulationExtruded Silicone Polyimide copolymer, 10 mils minimum average thickness, 7.5 mils minimum thickness at any point. See Facing Page for compound details. Insulation may be applied as one single extrusion, or two extrusions consisting of pre-insulated singles laid parallel or twisted together, intermittently or continuously bonded together by a second extrusion forming the flat cable minimum insulation thickness at any point along the intermittently bonded cable shall be 10 mils.
		
			AssemblyTwo to 150 conductors. May include mixed gauges.
		
			ShieldOptional.
		
			CoveringOptional. Extruded Silicone Polyimide Copolymer, 5 mils minimum thickness at any point, 80 mils maximum thickness. See Facing Page for compound for details.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20704	Issued:1991-08-05
			Revised:2012-04-02


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	34 AWG - 24 AWG, solid or stranded.

Insulation	Extruded Silicone Polyimide copolymer, 10 mils minimum average thickness, 7.5 mils minimum thickness at any point. See Facing Page for compound details. Insulation may be applied as one single extrusion, or two extrusions consisting of pre-insulated singles laid parallel or twisted together, intermittently or continuously bonded together by a second extrusion forming the flat cable minimum insulation thickness at any point along the intermittently bonded cable shall be 10 mils.

Assembly	Two to 150 conductors. May include mixed gauges.

Shield	Optional.

Covering	Optional. Extruded Silicone Polyimide Copolymer, 5 mils minimum thickness at any point, 80 mils maximum thickness. See Facing Page for compound for details.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.