UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20706
                        
                            Issued:1991-08-02
                    
                            Revised:2017-12-07
                    
                            Style
                            20706
                        
                            Laminated flat ribbon cable.
                    
			Rating105 deg C, 60 Vac, Horizontal Flame.
		
			Conductor42 AWG - 12 AWG, flat or round. If flat conductors, 1.0 - 10.0 mils thickness, 3 - 100 mils wide.
		
			Insulation(1) PVC, 3.5 mils minimum bonded each side, or (2) 0.4 mil minimum biaxially oriented PETP film bonded each side with 0.5 mil polyester adhesive or (3) 0.8 mil minimum PETP film or flame retardant polyester film and 2.5 mils minimum PVC adhesive on each side of conductors laminated together. 10 mils minimum edge width and 3 mils minimum between conductors. (4) 0.4 mil minimum polyimide film bonded on each side of conductors with 0.4 mil minimum polyester adhesive. Total combined thickness shall be 0.8 mil minimum.
		
			AssemblyTwo to 150 conductors, laid straight or irregular parallel in one plane.
		
			ShieldOptional.
		
			CoveringOptional - Polyester film, 0.02 - 4.0 mils bonded to cable with polyester adhesive.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20706	Issued:1991-08-02
			Revised:2017-12-07


Rating	105 deg C, 60 Vac, Horizontal Flame.

Conductor	42 AWG - 12 AWG, flat or round. If flat conductors, 1.0 - 10.0 mils thickness, 3 - 100 mils wide.

Insulation	(1) PVC, 3.5 mils minimum bonded each side, or (2) 0.4 mil minimum biaxially oriented PETP film bonded each side with 0.5 mil polyester adhesive or (3) 0.8 mil minimum PETP film or flame retardant polyester film and 2.5 mils minimum PVC adhesive on each side of conductors laminated together. 10 mils minimum edge width and 3 mils minimum between conductors. (4) 0.4 mil minimum polyimide film bonded on each side of conductors with 0.4 mil minimum polyester adhesive. Total combined thickness shall be 0.8 mil minimum.

Assembly	Two to 150 conductors, laid straight or irregular parallel in one plane.

Shield	Optional.

Covering	Optional - Polyester film, 0.02 - 4.0 mils bonded to cable with polyester adhesive.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.