UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20707
                        
                            Issued:1991-08-09
                    
                            Revised:2012-07-06
                    
                            Style
                            20707
                        
                            Parallel Cord.
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			Conductor26 AWG - 14 AWG consisting of 36-33 stranding, bare copper.
		
			InsulationIntegral with Jacket. PVC, 45 mils min average, 40 mils minimum at any point. A 3 mil min at any point covering of nylon, polyester or propylene shall be applied directly over the No. 22 or 24 AWG copper conductor.
		
			AssemblyThree conductors, same as type SPT-2. One 18-14 AWG (36-24 AWG stranding) and one 15 AWG (36-33 AWG stranding) laid parallel and on two sides. One 26-22 AWG (34 AWG stranding) located in between.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial purpose cord to be used only as a power supply cord for appliances employing an attachment plug with a water detection circuit.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20707	Issued:1991-08-09
			Revised:2012-07-06


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	26 AWG - 14 AWG consisting of 36-33 stranding, bare copper.

Insulation	Integral with Jacket. PVC, 45 mils min average, 40 mils minimum at any point. A 3 mil min at any point covering of nylon, polyester or propylene shall be applied directly over the No. 22 or 24 AWG copper conductor.

Assembly	Three conductors, same as type SPT-2. One 18-14 AWG (36-24 AWG stranding) and one 15 AWG (36-33 AWG stranding) laid parallel and on two sides. One 26-22 AWG (34 AWG stranding) located in between.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special purpose cord to be used only as a power supply cord for appliances employing an attachment plug with a water detection circuit.