UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20710
                        
                            Issued:1991-09-04
                    
                            Revised:2012-07-27
                    
                            Style
                            20710
                        
                            Jacketed Cable
                    
			Rating200 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure and having a min rating of 200c, 600v. The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap.
		
			ShieldOptional.
		
			JacketFEP, dia. of 0.425 inches or less, 12 mils minimum at any point. 10 mils min at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20710	Issued:1991-09-04
			Revised:2012-07-27


Rating	200 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure and having a min rating of 200c, 600v. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap.

Shield	Optional.

Jacket	FEP, dia. of 0.425 inches or less, 12 mils minimum at any point. 10 mils min at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances or electronic equipment.