UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20711
                        
                            Issued:1991-09-04
                    
                            Revised:2011-09-27
                    
                            Style
                            20711
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating200 deg C, 300 Vac, Horizontal Flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure .
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All insulated conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted insulated conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermosplastic-tape wrap.
		
			ShieldOptional.
		
			JacketExtruded FEP.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inch or less10 mils8 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20711	Issued:1991-09-04
			Revised:2011-09-27


Rating	200 deg C, 300 Vac, Horizontal Flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure .

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All insulated conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted insulated conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermosplastic-tape wrap.

Shield	Optional.

Jacket	Extruded FEP.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	10 mils	8 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances or electronic equipment.