UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20724
                        
                            Issued:1991-11-20
                    
                            Revised:2019-11-07
                    
                            Style
                            20724
                        
                            Multiconductor Cable with Extruded Non-integral Jacket.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together.  The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable.  The lay of the conductor is not specified.  A barrier layer and/or fillers are optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.  A 6 mil or heavier thermoplastic covering may be extruded over the conductor assembly.
		
			JacketExtruded TPU
		
			major dia in inches
		
			0.350 or less15 mils min average12 mils min at any point
		
			0.351-0.700 in30 avg24 min
		
			0.701-1.000 in45 avg36 min
		
			1.001-1.500 in60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment and appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20724	Issued:1991-11-20
			Revised:2019-11-07


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG minimum, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier thermoplastic covering may be extruded over the conductor assembly.

Jacket	Extruded TPU
	major dia in inches
	0.350 or less	15 mils min average	12 mils min at any point
	0.351-0.700 in	30 avg	24 min
	0.701-1.000 in	45 avg	36 min
	1.001-1.500 in	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment and appliances.