UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20737
                        
                            Issued:1992-04-20
                    
                            Revised:2011-11-21
                    
                            Style
                            20737
                        
                            Flat cable with extruded insulation.
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG - 4 AWG, solid or stranded, round or flat, bare, silver plated or nickel plated copper. If flat, minimum width 20 mils, maximum width 2-1/2 inch, 1 mil minimum thickness, 15 mils maximum thickness.
		
			InsulationOn each side of the conductor PET 2 mils minimum thickness at any point with PET adhesive, 1 mil minimum thickness at any point, backing bonded together. 25 mils minimum thickness at any point width on outside edges, 10 mils minimum thickness at any point width between adjacent conductors.
		
			AssemblyTwo to 100 conductors. Length of insulated conductors not specified.
		
			ShieldOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20737	Issued:1992-04-20
			Revised:2011-11-21


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG - 4 AWG, solid or stranded, round or flat, bare, silver plated or nickel plated copper. If flat, minimum width 20 mils, maximum width 2-1/2 inch, 1 mil minimum thickness, 15 mils maximum thickness.

Insulation	On each side of the conductor PET 2 mils minimum thickness at any point with PET adhesive, 1 mil minimum thickness at any point, backing bonded together. 25 mils minimum thickness at any point width on outside edges, 10 mils minimum thickness at any point width between adjacent conductors.

Assembly	Two to 100 conductors. Length of insulated conductors not specified.

Shield	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.