UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20741
                        
                            Issued:1992-05-12
                    
                            Revised:2012-07-30
                    
                            Style
                            20741
                        
                            Multiple Conductor Cable with Extruded Insulation with an Extruded Non-integral Jacket.
                    
			Rating60, 90 deg C, 600 Vac, Horizontal flame, Moisture Resistant 60 deg. C.
		
			ConductorResistance Wire. Nickel, Copper Alloy or Copper, size varies - dependent upon wattage demand.
		
			InsulationExtruded PVC, 30 mils min average, 27 mils minimum at any point. R/C QMTT2 rated for type TW, THW or THWN compound, for 60 deg. C Wet, also suitable for use at 90 deg. C in air.
		
			AssemblyConsists of two conductors described above laid flat with an overall shield and jacket.
		
			ShieldCopper braid consisting of bare copper. Combination of strand size and number of strands such that braid is equivalent to 18 AWG.
		
			CoveringOptional. Extruded nylon, thickness 3 mils, plus or minus 1 mil.
		
			JacketExtruded PVC, 20 mils min average, 16 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. (Optional marking) The conductor alloy designation shall be included Ohms per foot rating.
		
			UseThermoplastic Insulated Resistance Wire for Heating Cable Units. The conductor alloy designation shall be included Ohms per foot rating (Optional marking).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20741	Issued:1992-05-12
			Revised:2012-07-30


Rating	60, 90 deg C, 600 Vac, Horizontal flame, Moisture Resistant 60 deg. C.

Conductor	Resistance Wire. Nickel, Copper Alloy or Copper, size varies - dependent upon wattage demand.

Insulation	Extruded PVC, 30 mils min average, 27 mils minimum at any point. R/C QMTT2 rated for type TW, THW or THWN compound, for 60 deg. C Wet, also suitable for use at 90 deg. C in air.

Assembly	Consists of two conductors described above laid flat with an overall shield and jacket.

Shield	Copper braid consisting of bare copper. Combination of strand size and number of strands such that braid is equivalent to 18 AWG.

Covering	Optional. Extruded nylon, thickness 3 mils, plus or minus 1 mil.

Jacket	Extruded PVC, 20 mils min average, 16 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General. (Optional marking) The conductor alloy designation shall be included Ohms per foot rating.

Use	Thermoplastic Insulated Resistance Wire for Heating Cable Units. The conductor alloy designation shall be included Ohms per foot rating (Optional marking).