UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20742
                        
                            Issued:1992-05-12
                    
                            Revised:2012-03-26
                    
                            Style
                            20742
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating60 deg C, 600 Vac, FT-2 flame.
		
			Conductor14 AWG - 10 AWG, solid or stranded.
		
			InsulationExtruded PVC. 31 mils minimum average thickness, 28 mils minimum thickness at any point. PVC compound suitable for use on type TW wire.
		
			CoveringExtruded nylon. 3 mils minimum average thickness over insulation.
		
			AssemblyConsists of two insulated conductors described above laid flat with an overall shield and jacket.
		
			ShieldCopper braid consists of bare copper. Combination of strand size and number of strands such that braid is equivalent to 16 AWG.
		
			JacketExtruded PVC. 20 mils minimum average thickness, 16 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseOnly as factory assembled nonheating leads on deicing units for use in concrete or asphalt driveway, walk, etc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20742	Issued:1992-05-12
			Revised:2012-03-26


Rating	60 deg C, 600 Vac, FT-2 flame.

Conductor	14 AWG - 10 AWG, solid or stranded.

Insulation	Extruded PVC. 31 mils minimum average thickness, 28 mils minimum thickness at any point. PVC compound suitable for use on type TW wire.

Covering	Extruded nylon. 3 mils minimum average thickness over insulation.

Assembly	Consists of two insulated conductors described above laid flat with an overall shield and jacket.

Shield	Copper braid consists of bare copper. Combination of strand size and number of strands such that braid is equivalent to 16 AWG.

Jacket	Extruded PVC. 20 mils minimum average thickness, 16 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Only as factory assembled nonheating leads on deicing units for use in concrete or asphalt driveway, walk, etc.