UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20743
                        
                            Issued:1992-05-12
                    
                            Revised:2012-01-12
                    
                            Style
                            20743
                        
                            Multiple conductors cable with Covering
                    
			Rating105 deg C, 30 Vac, 150 Vac, 300 Vac, 600 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringInner - (optional) Extruded polybutylene terephthalate, PTFE or FEP, ETFE, PVC or PFA 2 mils min at any point, or PETP with a PVC or polyester adhesive (milene) or combination thereof, min wall at any point 2 mils or 0.5 mils min polyester terephthalate tape with optional PVC adhesive. Outer Covering - Conductive PFA with a minimum thickness of 5 mils employed over the cable core.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment or appliances. Conductive outer covering - remove covering before terminating or splicing.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20743	Issued:1992-05-12
			Revised:2012-01-12


Rating	105 deg C, 30 Vac, 150 Vac, 300 Vac, 600 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Inner - (optional) Extruded polybutylene terephthalate, PTFE or FEP, ETFE, PVC or PFA 2 mils min at any point, or PETP with a PVC or polyester adhesive (milene) or combination thereof, min wall at any point 2 mils or 0.5 mils min polyester terephthalate tape with optional PVC adhesive. Outer Covering - Conductive PFA with a minimum thickness of 5 mils employed over the cable core.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment or appliances. Conductive outer covering - remove covering before terminating or splicing.