UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20744
                        
                            Issued:1992-05-13
                    
                            Revised:2015-07-20
                    
                            Style
                            20744
                        
                            Bonded or laminated flat ribbon cable.
                    
			Rating60, 80 deg C, 30 Vac, 150 Vac, Horizontal flame.
		
			Conductor36-10 AWG conductor size;
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure, The minimum voltage and temperature ratings of the singles shall be the rating of the overall cable.
		
			AssemblyTwo to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable or twisted to form a round cable. Parallel pairs may be shielded. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable.
		
			Inner CoveringOptional, extruded PVC or one or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mil min at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified.
		
			ShieldOptional.
		
			Outer CoveringOptional, PVC, 5 - 80 mils; Or PTFE, 2 - 80 mils; Or one or two layers of 1 mils polyester film with polyester adhesive.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20744	Issued:1992-05-13
			Revised:2015-07-20


Rating	60, 80 deg C, 30 Vac, 150 Vac, Horizontal flame.

Conductor	36-10 AWG conductor size;

Insulation	Labeled or complying with Manufacturer's AWM Procedure, The minimum voltage and temperature ratings of the singles shall be the rating of the overall cable.

Assembly	Two to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable or twisted to form a round cable. Parallel pairs may be shielded. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable.

Inner Covering	Optional, extruded PVC or one or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mil min at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified.

Shield	Optional.

Outer Covering	Optional, PVC, 5 - 80 mils; Or PTFE, 2 - 80 mils; Or one or two layers of 1 mils polyester film with polyester adhesive.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.