UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20756
                        
                            Issued:1992-08-20
                    
                            Revised:2012-04-02
                    
                            Style
                            20756
                        
                            Multiple-Conductor cable using non-integral Extruded Insulation
                    
			Rating250 deg C, 600 Vac, Horizontal flame.
		
			Conductor24 AWG minimum, Resistance Wire, solid or stranded.
		
			CoveringOptional. Braided Glass.
		
			InsulationExtruded MFA or extruded PFA, 20 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			AssemblyTwo conductors.
		
			CoveringOptional. Braid and/or shield.
		
			CoveringOptional. Extruded PFA or extruded MFA, 18 mils minimum average thickness, 15 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseHeating Cable, where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20756	Issued:1992-08-20
			Revised:2012-04-02


Rating	250 deg C, 600 Vac, Horizontal flame.

Conductor	24 AWG minimum, Resistance Wire, solid or stranded.

Covering	Optional. Braided Glass.

Insulation	Extruded MFA or extruded PFA, 20 mils minimum average thickness, 18 mils minimum thickness at any point.

Assembly	Two conductors.

Covering	Optional. Braid and/or shield.

Covering	Optional. Extruded PFA or extruded MFA, 18 mils minimum average thickness, 15 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Heating Cable, where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.