UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20776
                        
                            Issued:1993-01-28
                    
                            Revised:2012-01-12
                    
                            Style
                            20776
                        
                            Laminated Flat Cable.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG - 12 AWG flat or round, material not specified. Flat conductors 0.7 - 10.0 mils thick, 10-500 mils wide.
		
			Insulation0.3 mil minimum biaxially oriented PETP (mylar) film bonded each side with 0.5 mil polyester adhesive.
		
			AssemblyTwo to 150 conductors Straight or irregular parallel in one plane.
		
			ShieldOptional. Metal faced polyester tape. Drain wire optional.
		
			CoveringOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20776	Issued:1993-01-28
			Revised:2012-01-12


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG - 12 AWG flat or round, material not specified. Flat conductors 0.7 - 10.0 mils thick, 10-500 mils wide.

Insulation	0.3 mil minimum biaxially oriented PETP (mylar) film bonded each side with 0.5 mil polyester adhesive.

Assembly	Two to 150 conductors Straight or irregular parallel in one plane.

Shield	Optional. Metal faced polyester tape. Drain wire optional.

Covering	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment