UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20777
                        
                            Issued:1993-02-09
                    
                            Revised:2012-04-06
                    
                            Style
                            20777
                        
                            Single conductor cable with extruded non-integral jacket.
                    
			Rating60, 80 deg C, 30 Vac, Horizontal flame.
		
			Conductor50 AWG min material and stranding not specified.
		
			InsulationExtruded solid or foamed PP, 2 mils min average. May be irradiated.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and or fillers optional. Two or three conductors and or conductor groups may be laid parallel to form flat cable. Manufacturer shall maintain a complete description of each assembly. Insulated conductor with optional inner shield, optional inner covering, optional middle covering, optional outer shield and optional outer covering.
		
			ShieldInner and outer shield are optional.
		
			CoveringInner - Optional. Extruded PVC, 2 mils min at any point. Middle - Extruded PVC, Polyamide, Polyester or Lacquered braid. Outer - Extruded PVC, 2 mils min average, 1.8 mils min at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Internal Wiring of Class 2 circuits in electronic equipment or, external patch cord for use between units in rack mounted equipment/component systems in Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20777	Issued:1993-02-09
			Revised:2012-04-06


Rating	60, 80 deg C, 30 Vac, Horizontal flame.

Conductor	50 AWG min material and stranding not specified.

Insulation	Extruded solid or foamed PP, 2 mils min average. May be irradiated.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and or fillers optional. Two or three conductors and or conductor groups may be laid parallel to form flat cable. Manufacturer shall maintain a complete description of each assembly. Insulated conductor with optional inner shield, optional inner covering, optional middle covering, optional outer shield and optional outer covering.

Shield	Inner and outer shield are optional.

Covering	Inner - Optional. Extruded PVC, 2 mils min at any point. Middle - Extruded PVC, Polyamide, Polyester or Lacquered braid. Outer - Extruded PVC, 2 mils min average, 1.8 mils min at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Internal Wiring of Class 2 circuits in electronic equipment or, external patch cord for use between units in rack mounted equipment/component systems in Class 2 circuits only.