UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2078
                        
                            Issued:1959-05-01
                    
                            Revised:2019-10-11
                    
                            Style
                            2078
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			ConductorExtruded PE insulated Coax Cable- No. 26 AWG, extruded PVC insulated Conductors - 20 AWG (26 strands of 34 AWG), No. 18 AWG (41 strandsof 34 AWG), No. 24 AWG(16 strands of 36 AWG).
		
			InsulationExtruded PVC insulation on all conductors except coaxial cable conductor, PVC to be 30 mils minimum average thickness, 27 mils minimum thickness at any point.  On Coaxial cable conductor, insulation shall be extruded Thermoplastic PE, 38 mils minimum average thickness, 34 mils minimum thickness at any point.
		
			AssemblyEleven conductors. One - 73 ohm miniature coaxial cable (No. 26 AWG copper-clad steel) Three - No. 20 AWG (26 strands
		
			34 AWG copper) Two - No. 18 AWG (41 strands
		
			34 AWG copper) Five - No. 24 AWG(16 strands #36 AWG copper) See Facing Page for Arrangement of Conductors. Coaxial conductor in center and the other ten wrapped around it with a lay of 4 to 6 inches. Fillers as required to round out cable. Coaxial cable insulation shall be Thermoplastic (Polyethylene), provided with a shield over insulation consisting of a copper braid using No. 36 AWG strands, and jacketed with PVC.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use as Remote Control Cable on Television Receivers.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2078	Issued:1959-05-01
			Revised:2019-10-11


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	Extruded PE insulated Coax Cable- No. 26 AWG, extruded PVC insulated Conductors - 20 AWG (26 strands of 34 AWG), No. 18 AWG (41 strandsof 34 AWG), No. 24 AWG(16 strands of 36 AWG).

Insulation	Extruded PVC insulation on all conductors except coaxial cable conductor, PVC to be 30 mils minimum average thickness, 27 mils minimum thickness at any point. On Coaxial cable conductor, insulation shall be extruded Thermoplastic PE, 38 mils minimum average thickness, 34 mils minimum thickness at any point.

Assembly	Eleven conductors. One - 73 ohm miniature coaxial cable (No. 26 AWG copper-clad steel) Three - No. 20 AWG (26 strands
	34 AWG copper) Two - No. 18 AWG (41 strands
	34 AWG copper) Five - No. 24 AWG(16 strands #36 AWG copper) See Facing Page for Arrangement of Conductors. Coaxial conductor in center and the other ten wrapped around it with a lay of 4 to 6 inches. Fillers as required to round out cable. Coaxial cable insulation shall be Thermoplastic (Polyethylene), provided with a shield over insulation consisting of a copper braid using No. 36 AWG strands, and jacketed with PVC.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use as Remote Control Cable on Television Receivers.