UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20781
                        
                            Issued:1993-03-09
                    
                            Revised:2012-07-06
                    
                            Style
                            20781
                        
                            Heating cable.
                    
			Rating125 deg C, 600 Vac, Horizontal flame.
		
			Conductor22 AWG - 12 AWG solid or stranded round, tinned or bare copper.
		
			InsulationTPE, 30 mils min average, 27 mils minimum at any point.
		
			AssemblyConductive Core - Two conductors laid parallel within the carbon loaded thermoset polyolefin, thickness not specified. Conductive Coating - (Optional)Conductive coating applied over conductive core, thickness not specified. Foil Overwrap - (Optional)Foil applied over conductive core, thickness not specified.
		
			ShieldOptional.
		
			CoveringOptional. 13 mils min at any point of extruded thermoplastic elastomer. See Facing Page for Compound.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe Heating Cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20781	Issued:1993-03-09
			Revised:2012-07-06


Rating	125 deg C, 600 Vac, Horizontal flame.

Conductor	22 AWG - 12 AWG solid or stranded round, tinned or bare copper.

Insulation	TPE, 30 mils min average, 27 mils minimum at any point.

Assembly	Conductive Core - Two conductors laid parallel within the carbon loaded thermoset polyolefin, thickness not specified. Conductive Coating - (Optional)Conductive coating applied over conductive core, thickness not specified. Foil Overwrap - (Optional)Foil applied over conductive core, thickness not specified.

Shield	Optional.

Covering	Optional. 13 mils min at any point of extruded thermoplastic elastomer. See Facing Page for Compound.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe Heating Cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.