UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20783
                        
                            Issued:1994-03-14
                    
                            Revised:2012-04-02
                    
                            Style
                            20783
                        
                            Laminated flat ribbon cable.
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor2-150, 40-12 AWG flat conductor, 0.8 - 10.0 mils thick, 10-100 mils wide. Straight or irregular parallel in one plane.
		
			InsulationOn each side of the conductors, 0.5 mils minimum of non-extruded irradiated flame retardant polyolefin adhesive bonded to 0.8 mils minimum of non-extruded PETP film. Minimum 10 mils insulation width on outside edges of conductors and 10 mils minimum insulation width between adjacent conductors.
		
			AssemblyTwo to 150 conductors. Length of insulated conductors not specified.
		
			ShieldOptional.
		
			CoveringOptional. Non-extruded PETP film, 0.02 - 4.0 mils bonded to cable with polyester adhesive.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20783	Issued:1994-03-14
			Revised:2012-04-02


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	2-150, 40-12 AWG flat conductor, 0.8 - 10.0 mils thick, 10-100 mils wide. Straight or irregular parallel in one plane.

Insulation	On each side of the conductors, 0.5 mils minimum of non-extruded irradiated flame retardant polyolefin adhesive bonded to 0.8 mils minimum of non-extruded PETP film. Minimum 10 mils insulation width on outside edges of conductors and 10 mils minimum insulation width between adjacent conductors.

Assembly	Two to 150 conductors. Length of insulated conductors not specified.

Shield	Optional.

Covering	Optional. Non-extruded PETP film, 0.02 - 4.0 mils bonded to cable with polyester adhesive.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.