UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2079
                        
                            Issued:1959-05-01
                    
                            Revised:2019-10-11
                    
                            Style
                            2079
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			ConductorFor used in miniature coxial cable assembly - Three of 73 ohm (26 AWG copper-clad steel);  For all conductors except miniature coxial cable assembly - Seven with 24 AWG (16 strands 36 AWG copper), two of 20 AWG (26 strands 34 AWG copper) and two of 18 AWG (41 strands 34 AWG copper).
		
			InsulationFor all conductors except miniature coxial cable assembly - Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.  For used in miniature coxial cable assembly - Extruded PE, 38 mils minimum average thickness, 34 mils minimum thickness at any point.
		
			AssemblyTotally fourteen Conductors.  Coaxial cables assembly in center and the other eleven wrapped around it with a lay of 5 to 6 inches.  Fillers as required to round out the cable.  For all conductors except coaxial cable assembly - Extruded PVC Insulated Singles as specified in Conductor and Insulation sections.  For coaxial cable assembly - Extruded PE Insulated Singles as specified in Conductor and Insulation sections, provided with a shield as specified in Shield section over insulations, and inner jacketed by Extruded PVC as specificed in Jacket section.
		
			ShieldCopper braid using 36 AWG strands.
		
			FillerRequired.
		
			JacketInner and Outer - Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use as Remote Control Cable on Television Receivers.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2079	Issued:1959-05-01
			Revised:2019-10-11


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	For used in miniature coxial cable assembly - Three of 73 ohm (26 AWG copper-clad steel); For all conductors except miniature coxial cable assembly - Seven with 24 AWG (16 strands 36 AWG copper), two of 20 AWG (26 strands 34 AWG copper) and two of 18 AWG (41 strands 34 AWG copper).

Insulation	For all conductors except miniature coxial cable assembly - Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point. For used in miniature coxial cable assembly - Extruded PE, 38 mils minimum average thickness, 34 mils minimum thickness at any point.

Assembly	Totally fourteen Conductors. Coaxial cables assembly in center and the other eleven wrapped around it with a lay of 5 to 6 inches. Fillers as required to round out the cable. For all conductors except coaxial cable assembly - Extruded PVC Insulated Singles as specified in Conductor and Insulation sections. For coaxial cable assembly - Extruded PE Insulated Singles as specified in Conductor and Insulation sections, provided with a shield as specified in Shield section over insulations, and inner jacketed by Extruded PVC as specificed in Jacket section.

Shield	Copper braid using 36 AWG strands.

Filler	Required.

Jacket	Inner and Outer - Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use as Remote Control Cable on Television Receivers.