UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20793
                        
                            Issued:1993-05-21
                    
                            Revised:2011-09-07
                    
                            Style
                            20793
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C, 300 Vac, FT2, 75 deg C Wet, Sunlight resistant.
		
			Conductor18 AWG, stranded copper, tinned or bare.
		
			InsulationExtruded PVC. For circuit conductor, insulation with 30 mils nominal thickness (not a requirement), 27 mils minimum thickness at any point before separation, 13 mils minimum thickness at any point after separation, 27 mils minimum thickness at any point between conductors. For grounding conductor, insulation with 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			AssemblyInsulated conductors same as Type SPT-1, with two circuit conductors and one grounding conductor. Fillers may be omitted.
		
			JacketExtruded PVC, same as Type SJTW, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial Purpose Power Supply Cord for Mobile Home Pipe Heating Cable.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20793	Issued:1993-05-21
			Revised:2011-09-07


Rating	105 deg C, 300 Vac, FT2, 75 deg C Wet, Sunlight resistant.

Conductor	18 AWG, stranded copper, tinned or bare.

Insulation	Extruded PVC. For circuit conductor, insulation with 30 mils nominal thickness (not a requirement), 27 mils minimum thickness at any point before separation, 13 mils minimum thickness at any point after separation, 27 mils minimum thickness at any point between conductors. For grounding conductor, insulation with 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Assembly	Insulated conductors same as Type SPT-1, with two circuit conductors and one grounding conductor. Fillers may be omitted.

Jacket	Extruded PVC, same as Type SJTW, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special Purpose Power Supply Cord for Mobile Home Pipe Heating Cable.