UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20801
                        
                            Issued:1993-08-12
                    
                            Revised:2019-11-07
                    
                            Style
                            20801
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complies with manufacturer's AWM Procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional. May be over one or more of the insulated conductors or applied over the assembly.
		
			JacketExtruded TPU.
		
			dia in inches
		
			0.425 or less45 mils minimum average thickness36 mils minimum thickness at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20801	Issued:1993-08-12
			Revised:2019-11-07


Rating	90 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complies with manufacturer's AWM Procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional. May be over one or more of the insulated conductors or applied over the assembly.

Jacket	Extruded TPU.
	dia in inches
	0.425 or less	45 mils minimum average thickness	36 mils minimum thickness at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection.