UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20807
                        
                            Issued:1993-09-23
                    
                            Revised:2012-05-29
                    
                            Style
                            20807
                        
                            Multiple-Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating80 deg C, 30 Vac, Cable Flame - Construction A; Horizontal Flame - Construction B.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo or three groups of two or more conductors, twisted pairs or groups of twisted conductors twisted together. Groups of conductors are laid parallel forming a flat cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Jacket may form a web between groups.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier Extruded PVC covering may be extruded over the conductor assembly.
		
			JacketPVC.
		
			Construction A External UseConstruction B Internal Use
		
			Diameter of cable under jacket in inchesmils minimum averagemils minimum at any pointmils minimum averagemils minimum at any point
		
			0.350 or less20171512
		
			0.351-0.70030243024
		
			0.701-1.00040364036
		
			1.001-1.50054485448
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseConstruction A: Internal wiring or External Interconnection of electronic equipment in Class 2 circuits only. Construction B: Internal wiring of electronic equipment in Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20807	Issued:1993-09-23
			Revised:2012-05-29


Rating	80 deg C, 30 Vac, Cable Flame - Construction A; Horizontal Flame - Construction B.

Conductor	40 AWG minimum.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two or three groups of two or more conductors, twisted pairs or groups of twisted conductors twisted together. Groups of conductors are laid parallel forming a flat cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Jacket may form a web between groups.

Shield	Optional.

Covering	Optional. A 6 mil or heavier Extruded PVC covering may be extruded over the conductor assembly.

Jacket	PVC.
		Construction A External Use		Construction B Internal Use
	Diameter of cable under jacket in inches	mils minimum average	mils minimum at any point	mils minimum average	mils minimum at any point
	0.350 or less	20	17	15	12
	0.351-0.700	30	24	30	24
	0.701-1.000	40	36	40	36
	1.001-1.500	54	48	54	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Construction A: Internal wiring or External Interconnection of electronic equipment in Class 2 circuits only. Construction B: Internal wiring of electronic equipment in Class 2 circuits only.