UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2081
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-16
                    
                            Style
                            2081
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			ConductorNo. 18 or 16 AWG consisting of No. 30 AWG or smaller tinned or bare copper strands.
		
			InsulationIntegral with Jacket. PVC, 60 mils min average, 54 mils minimum at any point.
		
			AssemblyThree conductors, same as type SPT-2 except for a 60 mil wall, the following minimum (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in..
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseWiring of butter conditioners where exposed at the door hinge at a temperature not exceeding 105 deg C or internal wiring of electric refrigerators where ripped not more than 3 inches. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2081	Issued:1959-05-01
			Revised:2012-04-16


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	No. 18 or 16 AWG consisting of No. 30 AWG or smaller tinned or bare copper strands.

Insulation	Integral with Jacket. PVC, 60 mils min average, 54 mils minimum at any point.

Assembly	Three conductors, same as type SPT-2 except for a 60 mil wall, the following minimum (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in..

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Wiring of butter conditioners where exposed at the door hinge at a temperature not exceeding 105 deg C or internal wiring of electric refrigerators where ripped not more than 3 inches. Polarity identification may be omitted.