UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20811
                        
                            Issued:1993-09-29
                    
                            Revised:2013-02-21
                    
                            Style
                            20811
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure having a minimum rating of 105 deg C, 600 Volts.
		
			AssemblyTwo or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. a 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			*Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20811	Issued:1993-09-29
			Revised:2013-02-21


Rating	105 deg C, 600 Vac, Cable flame.

Conductor	40 AWG minimum.

Insulation	Labeled or complying with manufacturer's AWM Procedure having a minimum rating of 105 deg C, 600 Volts.

Assembly	Two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. a 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils
	*Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.