UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20813
                        
                            Issued:1993-10-13
                    
                            Revised:2012-04-02
                    
                            Style
                            20813
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating150, 200 deg C, 300 Vac, Horizontal flame, Optional - 80 deg C Oil, Optional - Gasoline Resistant
		
			Conductor30 AWG - 10 AWG, solid or stranded.
		
			InsulationExtruded FEP, 10 mils min average, 8 mils minimum at any point.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors described above, cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly or individual conductors or groups of conductors.
		
			JacketExtruded FEP, 20 mils min average, 16 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances where the jacket is exposed to sulfuric acid in concentrations not exceeding 10 N.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20813	Issued:1993-10-13
			Revised:2012-04-02


Rating	150, 200 deg C, 300 Vac, Horizontal flame, Optional - 80 deg C Oil, Optional - Gasoline Resistant

Conductor	30 AWG - 10 AWG, solid or stranded.

Insulation	Extruded FEP, 10 mils min average, 8 mils minimum at any point.

Assembly	Two or more individually insulated conductors or groups of insulated conductors described above, cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly or individual conductors or groups of conductors.

Jacket	Extruded FEP, 20 mils min average, 16 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances where the jacket is exposed to sulfuric acid in concentrations not exceeding 10 N.