UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20815
                        
                            Issued:1993-11-24
                    
                            Revised:2012-04-13
                    
                            Style
                            20815
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 90 Vac, Cable flame.
		
			InsulationLabeled or complies with this Manufacturer's AWM procedure.
		
			AssemblyTwo or more conductors, insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional - Extruded PVC, 5mils minimum thickness, extruded PTFE, extruded PFA, extruded FEP or extruded ETFE, 5 mils minimum thickness at any point. PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 inch and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal and external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20815	Issued:1993-11-24
			Revised:2012-04-13


Rating	60 deg C, 90 Vac, Cable flame.

Insulation	Labeled or complies with this Manufacturer's AWM procedure.

Assembly	Two or more conductors, insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional - Extruded PVC, 5mils minimum thickness, extruded PTFE, extruded PFA, extruded FEP or extruded ETFE, 5 mils minimum thickness at any point. PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 inch and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal and external wiring.