UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20819
                        
                            Issued:1994-01-27
                    
                            Revised:2012-07-29
                    
                            Style
                            20819
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Cable flame for Construction A, Horizontal flame for Construction B.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with AWM Manufacture's Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketPVC.
		
			Construction A External UseConstruction B Internal Use
		
			Dia of cable under jacketMinimum averageMinimum at any pointMinimum averageMinimum at any point
		
			0.350 inch or less20 mils17 mils15 mils12 mils
		
			0.351-0.700 inch30 mils24 mils30 mils24 mils
		
			0.701-1.000 inch40 mils36 mils40 mils36 mils
		
			1.001-1.500 inch54 mils48 mils54 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20819	Issued:1994-01-27
			Revised:2012-07-29


Rating	60 deg C, 30 Vac, Cable flame for Construction A, Horizontal flame for Construction B.

Conductor	40 AWG minimum.

Insulation	Labeled or complying with AWM Manufacture's Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	PVC.
		Construction A External Use		Construction B Internal Use
	Dia of cable under jacket	Minimum average	Minimum at any point	Minimum average	Minimum at any point
	0.350 inch or less	20 mils	17 mils	15 mils	12 mils
	0.351-0.700 inch	30 mils	24 mils	30 mils	24 mils
	0.701-1.000 inch	40 mils	36 mils	40 mils	36 mils
	1.001-1.500 inch	54 mils	48 mils	54 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring