UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20822
                        
                            Issued:1994-02-03
                    
                            Revised:2019-11-07
                    
                            Style
                            20822
                        
                            Multiconductor Cable with Extruded Non-integral Jacket.
                    
			Rating105 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG - 10 AWG solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more singles, twisted pairs or groups of twisted singles twisted together.  The singles or groups of singles may be laid parallel forming a flat, oval or round cable.  The flat cable may consist of 2 or more groups of conductors with the jacket forming an interconnecting web.  The lay of the conductors are not specified.  A barrier layer and/or fillers are optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.  A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded EPDM (EPTR - Ethylene Propylene Thermoplastic Rubber)
		
			major dia in inches
		
			0.700 or less30 mils min average24 mils min at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.501 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment or internal wiring of electronic equipment or appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20822	Issued:1994-02-03
			Revised:2019-11-07


Rating	105 deg C, 30 Vac, Cable flame.

Conductor	40 AWG - 10 AWG solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more singles, twisted pairs or groups of twisted singles twisted together. The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The flat cable may consist of 2 or more groups of conductors with the jacket forming an interconnecting web. The lay of the conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded EPDM (EPTR - Ethylene Propylene Thermoplastic Rubber)
	major dia in inches
	0.700 or less	30 mils min average	24 mils min at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.501 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment or internal wiring of electronic equipment or appliances.