UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20823
                        
                            Issued:1994-02-03
                    
                            Revised:2012-03-22
                    
                            Style
                            20823
                        
                            Multiple-Conductor Cable Using Non-Integral Jacket
                    
			Rating105 deg C, 150 Vac, Cable flame.
		
			Conductor40 AWG - 10 AWG solid or stranded
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more singles, twisted pairs or groups of twisted singles twisted together. The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The flat cable may consist of 2 or more groups of conductors with the jacket forming an interconnecting web. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil thick or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded EPDM
		
			Major Diameter of Cable in inchesAverage minimum thickness in milsMinimum thickness at any point in mils
		
			0.700 or less3024
		
			0.701-1.0004536
		
			1.001-1.5016048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment or internal wiring of electronic equipment or appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20823	Issued:1994-02-03
			Revised:2012-03-22


Rating	105 deg C, 150 Vac, Cable flame.

Conductor	40 AWG - 10 AWG solid or stranded

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more singles, twisted pairs or groups of twisted singles twisted together. The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The flat cable may consist of 2 or more groups of conductors with the jacket forming an interconnecting web. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil thick or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded EPDM
	Major Diameter of Cable in inches	Average minimum thickness in mils	Minimum thickness at any point in mils
	0.700 or less	30	24
	0.701-1.000	45	36
	1.001-1.501	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment or internal wiring of electronic equipment or appliances.