UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20824
                        
                            Issued:1994-02-03
                    
                            Revised:2012-05-14
                    
                            Style
                            20824
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating105 deg C, 300 Vac, Cable flame.
		
			Conductor40 AWG - 10 AWG solid or stranded round, tinned or bare copper.
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more singles, twisted pairs or groups of twisted singles twisted together.  The singles or groups of singles may be laid parallel forming a flat, oval or round cable.  The flat cable may consist of 2 or more groups of conductors with the jacket forming an interconnecting web. The lay of the conductors are not specified.  A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - Extruded PVC, 6 mils minimum thickness at any point.
		
			JacketExtruded EP
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701 - 1.000 inch45 mils36 mils
		
			1.001 - 1.501 inches60 mils48 mils
		
			* - Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment or internal wiring of electronic equipment or appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20824	Issued:1994-02-03
			Revised:2012-05-14


Rating	105 deg C, 300 Vac, Cable flame.

Conductor	40 AWG - 10 AWG solid or stranded round, tinned or bare copper.

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more singles, twisted pairs or groups of twisted singles twisted together. The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The flat cable may consist of 2 or more groups of conductors with the jacket forming an interconnecting web. The lay of the conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - Extruded PVC, 6 mils minimum thickness at any point.

Jacket	Extruded EP
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701 - 1.000 inch	45 mils	36 mils
	1.001 - 1.501 inches	60 mils	48 mils
	* - Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment or internal wiring of electronic equipment or appliances.