UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20825
                        
                            Issued:1994-02-03
                    
                            Revised:2012-10-31
                    
                            Style
                            20825
                        
                            Multi-conductor Cable with Extruded Non-integral Jacket
                    
			Rating105 deg C, 300 Vac, Cable flame.
		
			Conductor40 AWG mimimum, solid or stranded.
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductor or groups of singles may be laid parallel forming a flat, oval or round cable. The flat cable may consist of 2 or more groups of conductors with the jacket forming an interconnecting wed. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional - Extruded PVC, 6 mils minimum thickness, may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded EPTR.
		
			@Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less45 mils36 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.501 inch80 mils64 mils
		
			@ - Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20825	Issued:1994-02-03
			Revised:2012-10-31


Rating	105 deg C, 300 Vac, Cable flame.

Conductor	40 AWG mimimum, solid or stranded.

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductor or groups of singles may be laid parallel forming a flat, oval or round cable. The flat cable may consist of 2 or more groups of conductors with the jacket forming an interconnecting wed. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional - Extruded PVC, 6 mils minimum thickness, may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded EPTR.
	@Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	45 mils	36 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.501 inch	80 mils	64 mils
	@ - Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.