UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20826
                        
                            Issued:1994-03-24
                    
                            Revised:2019-11-07
                    
                            Style
                            20826
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C, 300 Vac, Horizontal flame, Oil Resistant 80 deg C.
		
			Conductor40 AWG - 10 AWG solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with AWM Maunfacture's Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional. May be over one or more of the insulated conductors or applied over the assembly.
		
			CoveringOptional.
		
			JacketPVC
		
			dia in inches
		
			0.248 or less20 mils min average16 mils minimum at any point
		
			0.249-0.425 dia30 avg24 min
		
			0.426-0.700 dia45 avg36 min
		
			0.701-1.000 dia60 avg48 min
		
			1.001-1.500 dia80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances or internal wiring of appliances where jacket exposed to oil at a temperature not exceeding 80 deg. C.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20826	Issued:1994-03-24
			Revised:2019-11-07


Rating	105 deg C, 300 Vac, Horizontal flame, Oil Resistant 80 deg C.

Conductor	40 AWG - 10 AWG solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with AWM Maunfacture's Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional. May be over one or more of the insulated conductors or applied over the assembly.

Covering	Optional.

Jacket	PVC
	dia in inches
	0.248 or less	20 mils min average	16 mils minimum at any point
	0.249-0.425 dia	30 avg	24 min
	0.426-0.700 dia	45 avg	36 min
	0.701-1.000 dia	60 avg	48 min
	1.001-1.500 dia	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances or internal wiring of appliances where jacket exposed to oil at a temperature not exceeding 80 deg. C.