UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20836
                        
                            Issued:1994-04-28
                    
                            Revised:2012-07-27
                    
                            Style
                            20836
                        
                            Jacketed Cable.
                    
			Rating80 deg C, 125 Vac, Horizontal flame.
		
			Conductorsolid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. Fillers - (Optional) Required if necessary to form a relatively smooth round core for extrusion of outer jacket.A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketPVC, 22 mils min average, 18 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseProbe Cable for use with instruments where shield is grounded.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20836	Issued:1994-04-28
			Revised:2012-07-27


Rating	80 deg C, 125 Vac, Horizontal flame.

Conductor	solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. Fillers - (Optional) Required if necessary to form a relatively smooth round core for extrusion of outer jacket.A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	PVC, 22 mils min average, 18 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Probe Cable for use with instruments where shield is grounded.