UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20843
                        
                            Issued:1994-05-16
                    
                            Revised:2019-11-07
                    
                            Style
                            20843
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			Conductor36 AWG - 10 AWG solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complies with manufacturer's AWM Procedure. The designations of all styles of individual cables used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or Assembly groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExcluded TPE
		
			major dia. in inches
		
			0.700 or less60 mils min average48 mils minimum at any point
		
			0.701-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20843	Issued:1994-05-16
			Revised:2019-11-07


Rating	80 deg C, 300 Vac, Cable flame.

Conductor	36 AWG - 10 AWG solid or stranded round, tinned or bare copper.

Insulation	Labeled or complies with manufacturer's AWM Procedure. The designations of all styles of individual cables used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or Assembly groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Excluded TPE
	major dia. in inches
	0.700 or less	60 mils min average	48 mils minimum at any point
	0.701-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.