UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2087
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-06
                    
                            Style
                            2087
                        
                            Single conductor with extruded insulation.
                    
			Rating75 deg C, 125 Vac, Horizontal flame.
		
			Conductor36 AWG resistance wire. Conductor diameters - 5 mil nominal, 4.6 mil minimum.
		
			InsulationExtruded PVC, 20 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			AssemblyTwo parallel conductors, one tinned and one untinned. One wire serves as the heater element and the other as the control element. Nylon covered conductors wound spirally on a twisted rayon core at a minimum rate of 28 turns per inch.
		
			CoveringProviuded over conductor. Extruded nylon (polyamide), miniature SPT design with 3 mils minimum wall thickness and a 6 mils minimum web.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn Electrically-heated blankets where exposed to temperatures not exceeding 75 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2087	Issued:1959-05-01
			Revised:2012-04-06


Rating	75 deg C, 125 Vac, Horizontal flame.

Conductor	36 AWG resistance wire. Conductor diameters - 5 mil nominal, 4.6 mil minimum.

Insulation	Extruded PVC, 20 mils minimum average thickness, 18 mils minimum thickness at any point.

Assembly	Two parallel conductors, one tinned and one untinned. One wire serves as the heater element and the other as the control element. Nylon covered conductors wound spirally on a twisted rayon core at a minimum rate of 28 turns per inch.

Covering	Proviuded over conductor. Extruded nylon (polyamide), miniature SPT design with 3 mils minimum wall thickness and a 6 mils minimum web.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In Electrically-heated blankets where exposed to temperatures not exceeding 75 deg C.