UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20870
                        
                            Issued:1994-09-01
                    
                            Revised:2012-02-20
                    
                            Style
                            20870
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Cable Flame.
		
			ConductorMinimun 36 AWG, solid or stranded.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form around cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic-tape wrap. Such as a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			CoveringOptional. Extruded PVC, 10 mils minimum average thickness.
		
			ShieldOptional.
		
			JacketExtruded TPU.
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			1.500 inch or less60 mils48 mils
		
			1.501-2.50080 mils64 mils
		
			2.501-4.000110 mils88 mils
		
			4.001 inch or greater140 mils112 mils
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20870	Issued:1994-09-01
			Revised:2012-02-20


Rating	80 deg C, 300 Vac, Cable Flame.

Conductor	Minimun 36 AWG, solid or stranded.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form around cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic-tape wrap. Such as a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Covering	Optional. Extruded PVC, 10 mils minimum average thickness.

Shield	Optional.

Jacket	Extruded TPU.
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	1.500 inch or less	60 mils	48 mils
	1.501-2.500	80 mils	64 mils
	2.501-4.000	110 mils	88 mils
	4.001 inch or greater	140 mils	112 mils
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.