UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20872
                        
                            Issued:1994-10-07
                    
                            Revised:2012-01-12
                    
                            Style
                            20872
                        
                            Bonded or laminated flat ribbon cable.
                    
			Rating80 deg C, 60 Vac, Horizontal flame.
		
			Conductor29 AWG - 20 AWG Flat, copper foil, 1.0 - 10.0 mils thick, 10-100 mils wide.
		
			InsulationOne side 0.5 mil min biaxially oriented PETP (polyester) film each side with 0.8 mil min polyester adhesive and the other side 0.6 mil polyimide film (PI) each side with 1.0 mil min polyester adhesive. Min 17 mils of insulation between the outside edges and the first conductor and 11 mils minimum width between adjacent conductors.
		
			AssemblyTwo to 150 conductors straight parallel in one plane
		
			ShieldOptional. Metal faced polyester tape. Drain wire optional.
		
			Coveringinner - (Optional)Polyester film, 0.02-4.0 mils bonded to cable with a polyester adhesive. Outer - (Optional) Paper film, 1.0-10.0 mils attached to cable with acrylic adhesive.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20872	Issued:1994-10-07
			Revised:2012-01-12


Rating	80 deg C, 60 Vac, Horizontal flame.

Conductor	29 AWG - 20 AWG Flat, copper foil, 1.0 - 10.0 mils thick, 10-100 mils wide.

Insulation	One side 0.5 mil min biaxially oriented PETP (polyester) film each side with 0.8 mil min polyester adhesive and the other side 0.6 mil polyimide film (PI) each side with 1.0 mil min polyester adhesive. Min 17 mils of insulation between the outside edges and the first conductor and 11 mils minimum width between adjacent conductors.

Assembly	Two to 150 conductors straight parallel in one plane

Shield	Optional. Metal faced polyester tape. Drain wire optional.

Covering	inner - (Optional)Polyester film, 0.02-4.0 mils bonded to cable with a polyester adhesive. Outer - (Optional) Paper film, 1.0-10.0 mils attached to cable with acrylic adhesive.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.