UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20876
                        
                            Issued:1994-11-29
                    
                            Revised:2019-11-07
                    
                            Style
                            20876
                        
                            Jacketed Cable.
                    
			Rating60 deg C, voltage not specified, Cable flame.
		
			InsulationLabeled or complies with this Manufacturers AWM procedure.
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldInner and outer shield are optional.
		
			CoveringOptional. 5 mil min. PVC covering may be extruded over the conductor assembly or PTFE, PFA, FEP, ETFE covering, 8 mils min average, 6 mils minimum at any point or foamed PE covering max 50 mils.
		
			JacketPVC
		
			major dia. in inches
		
			0.700 or less60 mils min average48 mils minimum at any point
		
			0.701-1.000 dia80 avg64 min
		
			1.001-1.500 dia110 avg88 min
		
			1.501-2.500 dia140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring and External Interconnection of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20876	Issued:1994-11-29
			Revised:2019-11-07


Rating	60 deg C, voltage not specified, Cable flame.

Insulation	Labeled or complies with this Manufacturers AWM procedure.

Assembly	Two or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.

Shield	Inner and outer shield are optional.

Covering	Optional. 5 mil min. PVC covering may be extruded over the conductor assembly or PTFE, PFA, FEP, ETFE covering, 8 mils min average, 6 mils minimum at any point or foamed PE covering max 50 mils.

Jacket	PVC
	major dia. in inches
	0.700 or less	60 mils min average	48 mils minimum at any point
	0.701-1.000 dia	80 avg	64 min
	1.001-1.500 dia	110 avg	88 min
	1.501-2.500 dia	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring and External Interconnection of Electronic Equipment.