UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20890
                        
                            Issued:1995-07-11
                    
                            Revised:2018-04-09
                    
                            Style
                            20890
                        
                            Flat ribbon cable
                    
			Rating105 deg C, 90 Vac, Horizontal flame.
		
			Conductor38 AWG - 12 AWG round or flat, bare, nickel, silver, gold, or tin plated copper, or polyurethane coated copper. Minimum thickness of 1.5 mils; maximum thickness of 6.0 mils. Minimum width of 10 mils and maximum width of 100 mils.
		
			InsulationOn each side of the conductors 3.5 mils minimum of PVC adhesive or 1.5 mils minimum of polyester adhesive bonded to 1.5 mils minimum of biaxially oriented polyethylene terephthalate minimum 10 mils insulation on width on outside edges of conductors and 8 mils minimum insulation width between adjacent conductors.
		
			Assembly2 through 150 conductors may be straight or irregular shaped and laid parallel and in one plane. Length of insulated conductors not specified.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 and Class 3 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20890	Issued:1995-07-11
			Revised:2018-04-09


Rating	105 deg C, 90 Vac, Horizontal flame.

Conductor	38 AWG - 12 AWG round or flat, bare, nickel, silver, gold, or tin plated copper, or polyurethane coated copper. Minimum thickness of 1.5 mils; maximum thickness of 6.0 mils. Minimum width of 10 mils and maximum width of 100 mils.

Insulation	On each side of the conductors 3.5 mils minimum of PVC adhesive or 1.5 mils minimum of polyester adhesive bonded to 1.5 mils minimum of biaxially oriented polyethylene terephthalate minimum 10 mils insulation on width on outside edges of conductors and 8 mils minimum insulation width between adjacent conductors.

Assembly	2 through 150 conductors may be straight or irregular shaped and laid parallel and in one plane. Length of insulated conductors not specified.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 and Class 3 circuits only.