UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20891
                        
                            Issued:1995-07-24
                    
                            Revised:2019-11-07
                    
                            Style
                            20891
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 600 Vac, Cable flame.
		
			Conductor16 AWG, stranded.
		
			InsulationExtruded TPE, 20 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			AssemblyTwo through 60 individually insulated conductors or groups of insulated conductors to form a round cable. The length of lay of the twisted conductors or groups, shall be in accordance with Type SE under the Standard for UL 62. A barrier layer and/or fillers are optional. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon (polyamide); oriented polyethylene terephthalate; or thermoplastic-tape wrap.
		
			JacketExtruded TPU.
		
			dia. in inches
		
			0.640 or less45 mils minimum average thickness36 mils minimum thickness at any point
		
			0.641-0.849 dia55 avg44 min
		
			0.850-1.000 dia65 avg52 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment where the acceptability of the combination is to be accepted by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20891	Issued:1995-07-24
			Revised:2019-11-07


Rating	80 deg C, 600 Vac, Cable flame.

Conductor	16 AWG, stranded.

Insulation	Extruded TPE, 20 mils minimum average thickness, 18 mils minimum thickness at any point.

Assembly	Two through 60 individually insulated conductors or groups of insulated conductors to form a round cable. The length of lay of the twisted conductors or groups, shall be in accordance with Type SE under the Standard for UL 62. A barrier layer and/or fillers are optional. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon (polyamide); oriented polyethylene terephthalate; or thermoplastic-tape wrap.

Jacket	Extruded TPU.
	dia. in inches
	0.640 or less	45 mils minimum average thickness	36 mils minimum thickness at any point
	0.641-0.849 dia	55 avg	44 min
	0.850-1.000 dia	65 avg	52 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment where the acceptability of the combination is to be accepted by Underwriters Laboratories Inc.