UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20902
                        
                            Issued:1995-10-25
                    
                            Revised:2019-11-22
                    
                            Style
                            20902
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating90 deg C, 600 Vac, Horizontal flame, Moisture Resistant 60 deg C.
		
			ConductorResistance Wire. Nickel, Copper Alloy or Copper, size varies dependent upon wattage demand.
		
			InsulationXLPE, 30 mils min average, 27 mils minimum at any point. See Facing Page.
		
			AssemblyConsists of 2 conductors described above laid flat with an overall shield and jacket.
		
			ShieldCopper braid consisting of bare copper or metal coated copper. Combination of strand size and number of strands such that braid is equivalent to 18 AWG.
		
			CoveringOptional. Extruded Nylon, thickness 3 mils, plus or minus 1 mil.
		
			JacketPVC, 20 mils min average, 16 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			Use"XLPE Insulated Resistance Wire for Heating Cable Units where exposed to temperatures not exceeding 90 deg. C; moisture resistant 60 deg. C". The conductor alloy designation shall be included ohms per foot rating. (Optional Marking).
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20902	Issued:1995-10-25
			Revised:2019-11-22


Rating	90 deg C, 600 Vac, Horizontal flame, Moisture Resistant 60 deg C.

Conductor	Resistance Wire. Nickel, Copper Alloy or Copper, size varies dependent upon wattage demand.

Insulation	XLPE, 30 mils min average, 27 mils minimum at any point. See Facing Page.

Assembly	Consists of 2 conductors described above laid flat with an overall shield and jacket.

Shield	Copper braid consisting of bare copper or metal coated copper. Combination of strand size and number of strands such that braid is equivalent to 18 AWG.

Covering	Optional. Extruded Nylon, thickness 3 mils, plus or minus 1 mil.

Jacket	PVC, 20 mils min average, 16 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	"XLPE Insulated Resistance Wire for Heating Cable Units where exposed to temperatures not exceeding 90 deg. C; moisture resistant 60 deg. C". The conductor alloy designation shall be included ohms per foot rating. (Optional Marking).