UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20911
                        
                            Issued:1996-01-26
                    
                            Revised:2012-04-02
                    
                            Style
                            20911
                        
                            Multiple-conductor Cable using Extruded Non-integral Jacket.
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			Conductor36 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable.  A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors.  The length of lay of the twisted conductors or groups is not specified.  Fillers may be used in a cable but are not required.  A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap.  Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded TPU.
		
			Dia of cable under jacket in inchesMin Average thickness milsMin At Any Point thickness mils
		
			0.700 or less4536
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			1.501-2.50011088
		
			2.501 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20911	Issued:1996-01-26
			Revised:2012-04-02


Rating	80 deg C, 300 Vac, Cable flame.

Conductor	36 AWG minimum, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded TPU.
	Dia of cable under jacket in inches	Min Average thickness mils	Min At Any Point thickness mils
	0.700 or less	45	36
	0.701-1.000	60	48
	1.001-1.500	80	64
	1.501-2.500	110	88
	2.501 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.