UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20914
                        
                            Issued:1996-03-27
                    
                            Revised:2012-05-08
                    
                            Style
                            20914
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			InsulationLabeled or complies with this Manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional. 5 mil min PVC covering may be extruded over the conductor assembly or PTFE, PFA, FEP, ETFE covering, 8 mils minimum average, 6 mils minimum at any point.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter under cableMinimum average thicknessMinimum thickness at any point
		
			0.350 inches or less20 mils17 mils
		
			0.351-0.700 inches30 mils24 mils
		
			0.701-1.000 inches45 mils36 mils
		
			1.001-1.500 inches60 mils48 mils
		
			1.501-2.500 inches80 mils64 mils
		
			2.501-4.000 inches110 mils88 mils
		
			4.001 inches or larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring and External Interconnection in Class 2 Circuits of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20914	Issued:1996-03-27
			Revised:2012-05-08


Rating	60 deg C, 30 Vac, Cable flame.

Insulation	Labeled or complies with this Manufacturer's AWM Procedure.

Assembly	Two or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional. 5 mil min PVC covering may be extruded over the conductor assembly or PTFE, PFA, FEP, ETFE covering, 8 mils minimum average, 6 mils minimum at any point.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter under cable	Minimum average thickness	Minimum thickness at any point
	0.350 inches or less	20 mils	17 mils
	0.351-0.700 inches	30 mils	24 mils
	0.701-1.000 inches	45 mils	36 mils
	1.001-1.500 inches	60 mils	48 mils
	1.501-2.500 inches	80 mils	64 mils
	2.501-4.000 inches	110 mils	88 mils
	4.001 inches or larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring and External Interconnection in Class 2 Circuits of Electronic Equipment.