UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20915
                        
                            Issued:1996-04-01
                    
                            Revised:2019-11-07
                    
                            Style
                            20915
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105, 60 deg C, 300 Vac, Horizontal flame, Moisture Resistant 60 deg C, 720hr Sunlight Resistance.
		
			Conductor18 AWG - 10 AWG solid or stranded round, tinned or bare copper.
		
			InsulationPVC
		
			18-12 AWG conductor size30 mils min average27 mils minimum at any point
		
			10 AWG45 avg40 min
		
			See Facing Page for compound designation.
		
			AssemblyTwo to five conductors, same as type SJT. Fillers, Binders - Optional. Strength Members - (Optional) unless needed to enable cord to comply with the mechanical strength test.
		
			JacketTPE - See Facing Page for compound designation
		
			conductor size
		
			18-14 AWG30 mils min average24 mils minimum at any point
		
			12 AWG45 mils avg36 mils min
		
			10 AWG60 mils avg48 mils min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use in internal or external power supply applications of electronic equipment in application requiring sunlight resistance and 60 deg. C water resistance where the use has been found acceptable by UL. (Similar to hard service cord Type SJEW except that PVC insulation is employed instead of TPE as specified under UL 62).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20915	Issued:1996-04-01
			Revised:2019-11-07


Rating	105, 60 deg C, 300 Vac, Horizontal flame, Moisture Resistant 60 deg C, 720hr Sunlight Resistance.

Conductor	18 AWG - 10 AWG solid or stranded round, tinned or bare copper.

Insulation	PVC
	18-12 AWG conductor size	30 mils min average	27 mils minimum at any point
	10 AWG	45 avg	40 min
	See Facing Page for compound designation.

Assembly	Two to five conductors, same as type SJT. Fillers, Binders - Optional. Strength Members - (Optional) unless needed to enable cord to comply with the mechanical strength test.

Jacket	TPE - See Facing Page for compound designation
	conductor size
	18-14 AWG	30 mils min average	24 mils minimum at any point
	12 AWG	45 mils avg	36 mils min
	10 AWG	60 mils avg	48 mils min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use in internal or external power supply applications of electronic equipment in application requiring sunlight resistance and 60 deg. C water resistance where the use has been found acceptable by UL. (Similar to hard service cord Type SJEW except that PVC insulation is employed instead of TPE as specified under UL 62).